List of Materials Used:
- Two 2-liter soda bottles
- Two additional 2-liter bottles were also used later on
- Four 3cm cardboard fins
- Duct tape
- Hot glue gun
- String
- Box Cutters and scissors
- Plastic trash bag
- Water
- A ball pump
- A clamp-contraption to hold the bottle in place
Design:
Days 1 & 2) The design of our rocket morphed over the course of the project. In the beginning, we started out with no modifications whatsoever. We then added two 3cm cardboard fins, wrapped in duct tape to prevent water damage, parallel to each other on the sides of the bottle. This was done to add stability to the rocket. The design is depicted in the image below:
Day 3) After analyzing the flight time of the rocket and how the fins failed, further modifications were made. A cone was needed to make the bottle more aerodynamic. So we cut the top half of another 2-liter soda bottle, placed it atop the opposite end of the opening and fashioned it into a cone. The plastic trash bag was cut and shaped into what we thought was a nicely formed circle and four strings connected to the bottle via duct tape were attached to it. We also added two more fins of equal size and shape to the bottle, however, we made a critical error in the application process--the fins were upside down. Despite our irritation for making such a careless mistake, we proceeded to launch the rocket in an attempt to gather more knowledge on what works best. However, our scientific endeavors were not enough to keep the fins attached to the bottle. In the image below, you can clearly see one of the four fall off upon the launching of the craft. Two more fell off in mid-air.
Another error we ran into was the deployment of our parachute--as seen in the image below:
Day 4) We cleaned off the old glue residue from the fins and reattached them correctly this time around. Since we were having difficulty keeping the fins on the bottle, we took a look at Joel/Kyrie's and Jayden/Jessica's rockets and replicated their fin-attachments. By applying duct tape alongside the fins, it doubled the adhesive of the hot glue and made for a great reinforcement. We had hoped the parachute would deploy if we'd folded it differently, but the folding wasn't the issue and we didn't realize this till afterwards.
Day 5) On the final day of launching, we knew what to keep and what needed to be modified. First we tackled our cone. By cutting another tube off of another bottle, we duct taped it to the cone to make it large enough to hold the parachute. We then hole-punched a hole into the cone and tied a string to it, which we then attached to the bottle. This was done so the cone would go wherever the bottle would. Our next issue was our parachute; the strings were too long, the shape wasn't working, and overall it was our biggest problem in our design. We first untangled the strings and cut them at equal lengths. Then we folded and taped off different areas of the parachute to make it more circular. In order to test the effectiveness of the parachute before the launch, I grabbed the bottle and dragged it through the air--imagine Andy flying Buzz Light Year around yelling "TO INFINITY AND BEYOND!" only I didn't scream those words...or anything for that matter. The next thing we did was add weight to the cone. We rolled a piece of duct tape into a ball, used more duct tape to keep it in the spout of the cone, and then wrapped the tip in more duct tape. The added weight was necessary to ensure our rocket would launch high enough in the air. The modifications can be seen in the images below:
Day 5) On the final day of launching, we knew what to keep and what needed to be modified. First we tackled our cone. By cutting another tube off of another bottle, we duct taped it to the cone to make it large enough to hold the parachute. We then hole-punched a hole into the cone and tied a string to it, which we then attached to the bottle. This was done so the cone would go wherever the bottle would. Our next issue was our parachute; the strings were too long, the shape wasn't working, and overall it was our biggest problem in our design. We first untangled the strings and cut them at equal lengths. Then we folded and taped off different areas of the parachute to make it more circular. In order to test the effectiveness of the parachute before the launch, I grabbed the bottle and dragged it through the air--imagine Andy flying Buzz Light Year around yelling "TO INFINITY AND BEYOND!" only I didn't scream those words...or anything for that matter. The next thing we did was add weight to the cone. We rolled a piece of duct tape into a ball, used more duct tape to keep it in the spout of the cone, and then wrapped the tip in more duct tape. The added weight was necessary to ensure our rocket would launch high enough in the air. The modifications can be seen in the images below:
Data Collection:
Launch History for Water Bottle Rockets (thanks to Jayden and Jessica for this idea)
| Day 1 | Day 2 | Day 3 | Day 4 | Day 5 | |
| Launch 1 | 2.9 s | 3.7 s | 3.7 s | 2.9 s | 4.5 s |
| Launch 2 | N/A | 5 s | N/A | 6.8 s | 4.8 s |
| Launch 3 | N/A | N/A | N/A | N/A | 8.2 s |
| Launch 4 | N/A | N/A | N/A | N/A | 3.8 s |
| Launch 5 | N/A | N/A | N/A | N/A | N/A |
For each of the launches prior to days 4 and 5, we used a psi of 50. When we realized that more water and more pressure would allow the rocket to go higher, we amped up the pressure to 70psi. Doing so gave us better results and phenomenal success in terms of air time.
Post-Lab Conclusions:
Looking back on the successes and failures of this lab, I can most definitely conclude that this lab was not only fun but very inspiring. It was through our want to succeed and desire to come out on top that we did so well. Mr. Blake didn't have to give much direction for us do well. The lab was basically a self-taught experiment and this project was incredible. To take something as simple as launching rockets in the air and to learn physics through it is mind blowing. However, before I officially wrap up the project, let us review what worked and what can be done in the future to get better results.
The four fins really made a difference in stabilizing the rocket, as did the adjustments to the parachute. If we had left the parachute as was, it wouldn't have deployed and we wouldn't have gotten the results we got. Using lots and lots of duct tape was another upside in this project. Keep in mind that you can never use too much of it. The duct tape was our life savior; from keeping things waterproof, making sure things stuck together, and adding more weight to the rocket. Another thing that worked was the placement of the strings. We noticed that the strings would tend to tangle in mid-air if they were tucked inside the cone. In order to fix that problem, we coiled a bit of the strings underneath the parachute while leaving some of it to hang on the outside. Doing so allowed the parachute to deploy faster. Also, the cone is another thing to keep in mind. Placing the cone lightly atop the bottle to cover the parachute rather than smashing it down is what should be done. You don't want the cone to be too snug on the bottle or else it won't fall off and allow the parachute to do its job. More water and more pressure really work, too.
Although, many of the rocket's features worked, there's always room for improvement. Larger fins could increase the rocket's stability. A larger parachute could catch wind faster and allow for more time in the air.
All-in-all, this project has taught the both of us a lot. Being able to learn physics in a hands-on manner is very effective and we hope to do more labs like this. Using the blogs to further our knowledge and better assist each other was also very effective. This was a fun lab and we hope for similar labs in the near future!









